Sale!

Water Overflow Sensor Attachment for PAL-1 & PAL-1LIGHT Personal Alarms – Flood Detection with Suction Cup Mount

SKU: PAL-OVERFLOW
Categories:

Original price was: $4.99.Current price is: $4.24.

Buy with Confidence
Covered by a 30-Day Money Back Guarantee. If it's not right for you, returns are easy and hassle-free.

Secure Checkout - Satisfaction Guaranteed - Money Back Guarantee

Secure checkout • 100% Satisfaction Guaranteed • 30 Day Money Back Guarantee • Easy Returns • Fast Customer Support

This little add-on turns your PAL-1 or PAL-1LIGHT personal alarm into a water overflow detector. Stick the suction cup sensor near a tub, sink, or water heater, and the alarm screams the moment water hits it. Five bucks of flood insurance.

  • Plugs directly into the PAL-1 or PAL-1LIGHT personal alarm — no extra equipment needed
  • Suction cup mount sticks to tubs, sinks, washing machines, or any smooth surface
  • Triggers the alarm the instant water contacts the sensor
  • Protects against flooding, overflow, and water damage before it gets expensive
  • Lightweight at 0.1 lbs with a 27-inch cord for flexible placement

Catch the Flood Before It Costs You Thousands

Water damage is one of those things nobody thinks about until they’re standing in a puddle at 2 AM. This sensor attachment connects to your PAL-1 or PAL-1LIGHT alarm and monitors for water overflow. Stick it near a washing machine, water heater, bathtub, or sump pump. The second water touches the sensor, your alarm goes off and you’ve got time to act before a small leak becomes a renovation project.

Who This Sensor Is For

Homeowners who’ve had a close call with a leaky water heater or overflowing tub. Apartment dwellers who can’t afford to flood their neighbor’s ceiling. Anyone with a basement that takes on water during storms. Landlords who want cheap flood monitoring in rental units. If you already own a PAL-1 or PAL-1LIGHT, this five-dollar attachment adds a whole new layer of protection.

Is This the Right Choice for You?

Choose this sensor if you want:

  • Affordable flood detection using your existing PAL-1 or PAL-1LIGHT alarm
  • Simple suction-cup installation with no wiring or Wi-Fi required
  • Early warning before water overflow turns into serious damage

Consider something else if you need:

  • A standalone flood alarm — this requires a PAL-1 or PAL-1LIGHT to function
  • A smart home water sensor with app alerts — this is analog, alarm-based only

How It Works

The sensor connects to the accessory port on the PAL-1 or PAL-1LIGHT personal alarm. The 27-inch cord gives you flexibility to mount the alarm on a shelf or wall while placing the sensor down near the floor or next to a water source. The suction cup sticks to any smooth surface — the side of a washing machine, a tile floor near a drain, or the outside of a tub. When water reaches the sensor, it completes the circuit and triggers the alarm immediately.

Quick Comparison: How Does a Personal Alarm Stack Up?

Feature Personal Alarm Pepper Spray Stun Gun Whistle
Volume 120-130 dB ✓ Not applicable Audible arc 80-100 dB
Legal Everywhere Yes — no restrictions ✓ Some state limits Some state limits Yes ✓
Physical Deterrent No — attention only Yes — pain, blindness ✓ Yes — muscle override ✓ No — attention only
Ease of Use Pull pin or press button ✓ Aim and spray Must make contact Must blow
Best For Kids, seniors, runners Walking, jogging Close encounters Backup signal

Practical Details

The sensor weighs just 0.1 pounds and the cord measures about 27 inches long. It comes with a suction cup for mounting. Compatible only with the PAL-1 and PAL-1LIGHT personal alarm models — won’t work with other alarms. No batteries needed for the sensor itself; it draws power from the connected alarm unit.

Five dollars to protect against water damage that could cost you thousands. If you’ve got the alarm, add this sensor.

Frequently Asked Questions

Will this work with any personal alarm?

No — it’s designed specifically for the PAL-1 and PAL-1LIGHT personal alarm models. It connects through their accessory port, which isn’t available on other alarms. You need one of those two units for this sensor to function.

Where’s the best place to put the sensor?

Near anything that could leak or overflow — washing machines, water heaters, sump pumps, bathtubs, or under kitchen sinks. Place the sensor at floor level or right where water would first appear. The 27-inch cord lets you position the alarm somewhere audible while the sensor sits where water would collect.

Does the suction cup hold on long-term?

On clean, smooth surfaces it holds well. Just clean the surface before mounting and press firmly. Check it periodically, especially in humid areas, and reattach if it loosens. On textured surfaces, you can position the sensor on the ground without the suction cup — it just needs to be where water would reach it.

IncludedSuction Cup
Weight0.1 lbs
Dimensions27.13" x 0.13"

Additional information

Reviews

There are no reviews yet.

Be the first to review “Water Overflow Sensor Attachment for PAL-1 & PAL-1LIGHT Personal Alarms – Flood Detection with Suction Cup Mount”

Your email address will not be published. Required fields are marked *

Related products